Product Information

aluminium cutting disc for chop saw belongs to 1000 series aluminum circle. Aluminum circle is the one of the deep-processing products of the aluminum sheet&plate. aluminium cutting disc for chop saw has single production process and high cost performance. It is commonly used in aluminum plate and tape series. 1060 Aluminum alloy has good elongation, tensile strength, corrosion resistance, good heat dissipation effect and good formability. It can meet the requirements of conventional processing.

Parameters Of aluminium cutting disc for chop saw

Equivalent product name

Aluminum circle, aluminium disc, aluminum disk, aluminum wafer, round aluminum sheet plate etc

Equivalent alloy name

A1060, 1060a, aa1060, 1060aa, al1060, al1060a, a 1060, aa 1060, jis a1060p, al1060 class, aw1060, en1060 grade etc

Temper

Soft HO (h0), H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H48, H111, H112, H114, H116, H131, H321 etc

Surface treatment: color coated, anodized (anodised), mirror etc

Features Of aluminium cutting disc for chop saw

• Wide range of selection on circles’ size.
• Excellent Surface Quality for lighting reflectors.
• Excellent in forming, welding and corrosion resistance though lacking the strength
• Excellent deep drawing and spinning quality.
• We provide heavy gauge circles with thicknesses up to 5mm diameter up to 1200mm, which would meet all your needs.
• Anodizing Quality and Deep Drawing Quality which is suitable for cookware as well.
• Well-Protected Packing.

Chemical Composition

• Si ( Silicon ): ≤ 0.25
• Cu ( Copper ): ≤ 0.05
• Mg ( Magnesium ): ≤ 0.03
• Zn ( Zinc ): ≤ 0.05
• Mn ( Manganese ): ≤ 0.03
• Cr ( Chromium ): /
• Fe ( Iron ): ≤ 0.35
• Ti ( Titanium ): ≤ 0.03
• V ( Vanadium ): ≤ 0.05
• Other: ≤ 0.05
• Others total: ≤ 0.15
• Al ( Aluminum ): remainder

Applications Of aluminium cutting disc for chop saw

Our 1060 aluminum circle aluminum disc can be used in the production of a variety of cookware products,such as for deep drawing, spinning, crafts, Reflector Panel, Traffic Sign, Decorative Products, Conductive Material, Construction Material, Electrical Appliances, etc

Cookware ( kitchenware, kitchen utensils ): non-stick pan, cookware bottom, cooking pot, high pressure cooker etc

THE PRODUCT PROCESS OF THE aluminium cutting disc for chop saw:

• 1.Prepare the master alloys
• 2.Melting furnace :put the alloys into the melting furnance
• 3.D.C.cast aluminum ingot:To made the mother ingot
• 4.Mill the aluminum ingot:to make the surface and side smooth
• 5.Heating furnnace
• 6.Hot rolling mill:made the mother coil
• 7.Colding rolling mill:the mother coil was rolled as the thickness you want to buy
• 8.Punching process:become the size what you want
• 9.Annealing furnace:change the temper
• 10.Final inspection
• 11.Packing:wooden case or wooden pallet
• 12.Delivery

aluminium cutting disc for chop saw PACKING:

aluminium cutting disc for chop saw can be packed in export standard, covering with brown paper and plastic film. Finally the Aluminium Round is fixed on wooden pallet/wooden case.

Shipping

Shipping methods: Express, sea freight, air cargo, land transportation, postal etc

Services

Sample service: we can provide samples, and the samples are free.

Tag

aluminium cutting disc for chop saw,aluminium,cutting,disc,for,chop,saw