alloy tread plate sheet
-639 items in stock
alloy tread plate sheet. Buy from the best! Low prices, Cut to size service, Fast despatch, Delivery from only £3.95+vat. Order Online!
More DetailsProduct Information
alloy tread plate sheet are medium strength alloy plates with exceptional corrosion resistance. Aluminum sheet plates are created by surpassing aluminum between rolls underneath pressure, it becomes thinner and longer in the moving direction.
Mechanical strength, rust resistance and dimensional stability are key aspects that give these alloy tread plate sheet the advantage over standard aluminum plates. The alloy tread plate sheet lend itself only to resistance welding. These plates have good workability but varies in tempers. The alloy plates are available in variety of sizes and thickness.
These alloy tread plate sheet are made from marine grade alloys and find usage in manufacturing of fast ferries, yachts, navy or passenger vessels and small pleasure crafts.
Specifications
Alloy | Temper | Thickness | Width | Length |
---|---|---|---|---|
1050 3003 2024 5005 5052 5754 5083 5086 6061 6063 6082 7075 | O H111 H112 H116 F T3 T4 T6 T651 | 4.5-220mm | 500-2250mm | 1000-6000mm |
Chemical Composition % Max.
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Each | Total | ||||||||||||
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | 0.03 | – | 0.03 | – | 99.50 |
2017 | 0.20 -0.8 |
0.70 | 3.5 -4.5 |
0.40 -1.0 |
0.40 -0.8 |
0.10 | – | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
2024 | 0.50 | 0.50 | 3.8 -4.9 |
0.30 -0.9 |
1.2 -1.8 |
0.10 | – | 0.25 | 0.15 | 0.05 | 0.15 | Remainder | |
3003 | >0.60 | 0.70 | 0.05 -0.20 |
1.0 -1.5 |
– | – | – | 0.10 | – | – | 0.05 | 0.15 | Remainder |
5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.50 -1.1 |
0.10 | – | 0.25 | – | – | 0.05 | 0.15 | Remainder |
5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2 -2.8 |
0.15 -0.35 |
– | 0.15 | – | – | 0.05 | 0.15 | Remainder |
5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6 -3.6 |
0.30 | – | 0.20 | 0.15 | – | 0.05 | 0.15 | Remainder |
5083 | 0.40 | 0.40 | 0.10 | 0.40 -1.0 |
4.0 -4.9 |
0.05 -0.25 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
5086 | 0.40 | 0.50 | 0.10 | 0.20 -0.7 |
3.5 -4.5 |
0.05 -0.25 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
6061 | 0.40 -0.8 |
0.70 | 0.15 -0.40 |
0.15 | 0.8 -1.2 |
0.04 -0.35 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
6063 | 0.20 -0.6 |
0.35 | 0.10 | 0.10 | 0.45 -0.9 |
0.10 | – | 0.10 | 0.10 | – | 0.05 | 0.15 | Remainder |
6082 | 0.70 -1.3 |
0.50 | 0.10 | 0.40- 1.0 |
0.60 -1.2 |
0.25 | – | 0.20 | 0.10 | – | 0.05 | 0.15 | Remainder |
7075 | 0.40 | 0.50 | 1.2 -2.0 |
0.30 | 2.1 -2.9 |
0.18 -0.28 |
– | 5.1 -6.1 |
0.20 | – | 0.05 | 0.15 | Remainder |
Featured Products
5083 Aluminum Alloy
Available in marine grade tempers H116, H321, H323 to spec ASTM B928. This is an excellent alloy, which is primarily used for its corrosion resistant properties. With possessing good welding capabilities for fabricating vessels it is a good standard engineering alloy. This alloy is commonly used in Europe and Asia.
5086 Aluminum Alloy
Available in marine grade tempers H116, H321; to spec ASTM B928. Tempers O, H112, H32; to spec ASTM B209. The marine grade alloy is very good at inter granular corrosion and possess better welding and forming properties. This alloy is commonly used in North America.
5454 Aluminum Alloy
The alloy is most commonly used where excellent forming ability is required and is available in O, H112, H32, H34; to specification ASTM B209 Tempers. It serves as the manufacturing material for large pressure vessels and certain marine fabricated products.
5052 H32 Sheet & plate
It is an alloy possessing good strength and welding ability, which is also easy to form and fabricate. This alloy is not considered a true marine alloy.
6061 T6 Sheet & plate
It is a heat treated alloy possessing higher strength and is used in many general engineering applications. This alloy is also not considered as true marine alloy.
Tag
alloy tread plate sheet,alloy,tread,plate,sheet
aluminium alloy plate 6061
New | aluminium alloy plate
aluminium alloy plate 6061 comes in a couple of different patterns. This one is called the Five Bar pattern. It is the most economical, and has the most thicknesses .
View Detailsaluminum tooling plate suppliers
New | aluminium alloy plate
aluminum tooling plate suppliers (or diamond Plate) is a smooth sheet with a regular diamond pattern on one side. It is used for flooring, cladding, tool boxes, ramps or anything that requires an ultra-hard wearing property.
View Detailscapral aluminium sheet
New | aluminium alloy plate
alumetals Supply is well-known for its extensive color selection for polyester capral aluminium sheet and coil. We have over 35 stock polyester paint colors
View Detailsblack aluminium plate
New | aluminium alloy plate
black aluminium plate 2500 x 1250 X3mm Five Bar Pattern 3mm Base Thickness
View Details10mm thick aluminium sheet
New | aluminium alloy plate
10mm thick aluminium sheet is also commonly referred to as either checker plate, durbar or check plate gets its name from the distinctive 5 raised bars.
View Detailsaluminium mounting plate
New | aluminium alloy plate
aluminium mounting plate Fantastic Low Prices · Best Quality · Melbourne Local Pickup · Order Now! 6061 Grade · aluminium mounting plate.
View Details
SOCIAL MEDIA